The Gryphon GD4300 reader is a high performance Laser scanner providing reading performance and reliability which makes it the optimum Laser option for any market and applications from Retail to Light Industrial. The Gryphon L GD4300 reader provides premium features and characteristics suitable for Retail, Office Automation and Light Industrial applications that might require long reading distances, snappy reading performance and a bright, well-defined scan line. The Gryphon L GD4300 readers' stylish design, reduced weight and physical dimensions together with a 1.8 m / 5.9 ft drop resistance spec produce a reliable and ergonomic solution with the combined excellence of ease-of-use and advanced reading capabilities.
- USB INTERFACE CABLES
- CAB-412 USB Type A, Opt-Pwr, Coiled (90A051922)
- CAB-424E Enhanced USB Type A, Coiled (90A052043)
- CAB-413-USB USB Straight IBM POS Mode (90A051903)
- CAB-426 USB TYPE A, STRAIGHT (90A051945)
- CAB-426E Enhanced USB Type A, Straight (90A052044)
- CAB-413E Enhanced Powered USB Straight (90A052045)
Scan Engine | Laser |
Light Source | 630-680nm VLD |
Scan Pattern | Single Line |
Scan Rate | Up to 100 Reads/sec |
Contrast Ratio | 25% minimum reflective difference |
Resolution | 0.102 mm / 4 mils |
Depth of field | 3.6 to 15.8 cm on 5 mils barcode 2.8 to 35.0 cm on 10 mils barcode Up to 69.0 cm on 20 mils barcode |
Tilt Angle | +/- 35 deg. |
Pitch Angle | +/- 50 deg. |
Skew Angle | +/- 65 deg. |
Ambient Light Immunity | 0 ~ 100000 Lux |
Symbologies supported | Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBar® Stacked Omni-directional |
Programming Method | Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
Driver available | JavaPOS, OPOS Utilities |
Indicators/Controls | Scanner Indicators: Good Read LED "Green spot" on the code Adjustable tone beeper |
Operating Modes | Trigger, Auto-trigger |
Communication Type | Corded |
Interfaces | GD4330: USB, RS232, Wedge & Wand Multi Interface GD4310: RS232, IBM 46XX, USB Multi Interface |
Supply Voltage | GD4330: 4.75-5.25 VDC GD4310: 4.5-14.0 VDC |
Power Consumption | GD4330: Operating typical 260mA @ 5V GD4310: Operating typical 185mA @ 5V Standby/Idle Typical 30 mA @ 5V |
Drop Specification | Withstands repeated drops from 1.8 m onto concrete |
Environmental Sealing | IP52 |
ESD Protection | Functional after 16kV Air discharge |
Operating Environment | 0 to 55 °C RH 5% ~ 90% non condensing |
Storage Environment | -20 ~ 70 °C RH 5% ~ 90% non condensing |
EMC/Safety Standards | Caution Laser Radiation - Do not stare into beam; CDRH Class II; IEC 60825-1 Class 2 |
External Dimensions (WxDxH) | Scanner: 71 x 100 x 181mm |
Weight | 169g |
Warranty | 5 Year Factory Warranty (not on cable, conditions apply) |
In Stock
$30 .38
View DetailsOut Of Stock
$41 .73
View DetailsIn Stock
$34 .76
View DetailsOut Of Stock
$29 .16
View DetailsOut Of Stock
$42 .24
View DetailsOut Of Stock
$38 .83
View DetailsOut Of Stock
$29 .17
View DetailsOut Of Stock
$30 .90
View DetailsOut Of Stock
$31 .16
View Details