All our products are New Zealand stock and come with a full manufacturer's warranty
Datalogic Gryphon I GD4130
The Gryphon I GD4100 readers are next-generation linear imagers providing the best reading performance and durability in the industry which makes it the ultimate solution for any market and application from retail to light industrial. The extreme versatility of the Gryphon I GD4100 readers combine many top performing and distinctive features together in a perfect balance, including reading capability, durability, ergonomics, connectivity and the usual appealing design.
Replacement Cables
Datalogic-Gryphon-I-GD4100.pdf
| Scan Engine | CCD Solid State |
| Light Source | Dual LED Array 630-670nm |
| Scan Pattern | Single Line |
| Scan Rate | Up to 325 Reads/sec |
| Contrast Ratio | 15% minimum reflective difference |
| Resolution | Minimum 3 mil (Code 39, PCS 0.9) |
| Depth of field | 6.0 to 18 cm on 5 mils barcode 3.5 to 30 cm on 7.5 mils barcode 2.0 to 45 cm on 10 mils barcode 3.0 to 60 cm on 13 mils barcode 3.0 to 80 cm on 20 mils barcode |
| Tilt Angle | +/- 35 deg. |
| Pitch Angle | +/- 65 deg. |
| Skew Angle | +/- 65 deg. |
| Ambient Light Immunity | 0 ~ 100000 Lux |
| Symbologies supported | Linear codes: Auto-discriminates all standard 1D codes including GS1 DataBar™ linear codes Stacked Codes: GS1 DataBar Expanded Stacked, GS1 DataBar Stacked and GS1 DataBar® Stacked Omni-directional |
| Programming Method | Manual: Reading special bar codes Automatic: (with RS-232) S/W commands through the serial port ALADDIN™: Windows configuration program |
| Driver available | JavaPOS, OPOS Utilities |
| Indicators/Controls | Scanner Indicators: Good Read LED "Green spot" on the code Adjustable tone beeper |
| Operating Modes | Trigger, Auto-trigger |
| Communication Type | Corded |
| Interfaces | GD4130: USB, RS232, Wedge & Wand Multi Interface GD4110: RS232, IBM 46XX, USB Multi Interface |
| Supply Voltage | GD4130: 4.75-5.25 VDC GD4110: 4.5-14.0 VDC |
| Power Consumption | GD4130: Operating typical 245mA @ 5V GD4110: Operating typical 225mA @ 5V Standby/Idle Typical 120 mA @ 5V |
| Drop Specification | Withstands repeated drops from 1.8 m onto concrete |
| Environmental Sealing | IP52 |
| ESD Protection | Functional after 16kV Air discharge |
| Operating Environment | 0 to 55 °C RH 0% ~ 90% non condensing |
| Storage Environment | -20 ~ 70 °C RH 0% ~ 90% non condensing |
| EMC/Safety Standards | UL 60950, CSA C22.2 No. 60950, IEC 60950 LED: IEC 60825-1 Class 1 |
| External Dimensions (WxDxH) | Scanner: 80 x 100 x 181mm |
| Weight | 169g |
| Warranty | 5 Year Factory Warranty (not on cable, conditions apply) |