New Zealand Stock & Warranty
All our products are New Zealand stock and come with a full manufacturer's warranty
C-3301i 1D Cordless Bluetooth Scanner, Scanner only
- Low cost Cordless Handheld 1D Imager
- Bluetooth ver. 2.1
- Up to 10 m Range
- Small form factor
- up to 300 Scans/sec
- Long operating time on battery charge
- Ultra-lightweight, yet solid scanner withstands drops up to 1.5 meter onto concrete
| Scan Engine | CCD linear image sensor |
| Light Source | Red LED 624 nm |
| Scan Pattern | Single Line |
| Scan Rate | 300 scans/sec |
| Motion Tolerance | N/A |
| Image Capture | N/A |
| Capture Area | N/A |
| Contrast Ratio | N/A |
| Resolution | 0.102 mm / 4 mils (Linear Barcodes) |
| Depth of field | Code 39: 5 mils - 5.5 to 7.5 cm 6 mils - 4.5 to 10.0 cm 10 mils - 3.5 to 17.5 cm 20 mils - 4.0 to 30.0 cm 30 mils - 6.0 to 50.0 cm Performance may be impacted by Bar code quality and environmental conditions |
| Tilt Angle | +/- 25° |
| Pitch Angle | +/- 50° |
| Skew Angle | +/- 65° |
| Ambient Light Immunity | Fluorescent 10,000 Lux Max. Direct Sun 100,000 Lux Max. |
| Symbologies supported | 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 Databar (RSS), GS1 DataBar Limited, GS1 DataBar Expanded, Code 11, IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSM-ISSN, Matrix 2of5, MSI/Plessey, S-Code, Telepen, Tri-Optic,UK/Plessey Postal Code: Chinese Post, Korean Postal Authority code |
| Programming Method | Scan codes in Manual |
| Driver available | JavaPOS, OPOS Utilities |
| Indicators | Multi Colour LED (red/green/blue) Buzzer |
| Operating Modes | Trigger |
| Communication Type | Bluetooth cordless |
| Communication Technology | Bluetooth Ver. 2.1 SPP/HID, output Class 2, Range up to 10 m 1 to 1 Connection to Bluetooth enabled Device Master/Slave mode Authentication & encryption |
| Interfaces | N/A |
| Supply Voltage | 6 VDC to Charging Base Battery: Li-ion 1100mAh, Charge time on Charging base 3 Hrs at 6V Operating Time: approx. 48 Hours at 1 Scan/5 Sec, Approx. 72 Hours Stand by |
| Power Consumption | 15mA Standby, Max.200 mA |
| Drop Specification | Designed to withstand repeated 1.5m drops to concrete Vibration Test 10-100Hz with 2G for 1 Hour |
| Environmental Sealing | IP42 |
| ESD Protection | N/A |
| Operating Environment | 0° ~ 50°C, Relative Humidity 20 - 85% none condensing |
| Storage Environment | -20° ~ 60°C, Relative Humidity 20 - 85% none condensing |
| EMC/Safety Standards | CE, FCC, VCCI, MFi, RoHS, IEC62471, IEC60950-1 |
| External Dimensions (WxDxH) | Scanner: 113 x 56 x 132 mm |
| Weight | Scanner 127 g Base 144 g |
opc-3301i_brochure.pdf
If you have any questions about this product, please complete the form below and our team will be in touch shortly.
