Zebra CHARGING/COMMS Cradle ET40/ET45 W/BOOT 10-IN

ProClip Charge + Communication Vehicle Cradles for ET4X with Rugged Boot + Expansion Back

Notes
• Cradle for ET4X (8” and 10”) for Vehicle/Forklift/Wall and Desktop installations.
• Designed to work with Rugged Boot and Expansion Back. Will function without Expansion Back also.
• Includes one USB-A port with locking retention clip.
• USB port provides 1.5A current to support DS3608-ER scanner in default power mode.
• Provides access to scanner and scan buttons while in cradle.
• VESA 75 and AMPS mounting ready
• Supports foldable keyboard mount for most common keyboards (i.e. iKey) (order ProClip SKU #216261).
• Can be upgraded to support Spring Lock (3PTY-PCLIP-216341) or Key Lock (3PTYPCLIP-216340). Recommended for rough vehicle installations (i.e. forklifts).
• If more than one USB port is required (i.e. for scanner & keyboard), order ProClip USB Hub (SKU #216258) to provide 3 USB ports and Gigibit Ethernet support.

Required Items
• ET4X must have Exoskeleton/Rugged Boot installed (SG-ET4X-8EXOSKL1-01 for 8" tablets) OR (SG-ET4X-10EXOSKL1-01 for 10" tablets).

For Charging (select option below):
• ProClip Hard-Wired Power Supply 12-48V Input / 12V 3A Output (3PTY-PCLIP-216355)
• ProClip Cigarette Lighter Adapter 12-24V Input / 12V 3A Output (3PTY-PCLIP-216358)
• ProClip AC Wall Power Supply 110-240 VAC Input / 12V DC 3A Output (3PTY-PCLIP-941025)

NOTE: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra’s Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service.